UHWMPE PE1000 Engineering Yas Sheet
Khoom Qhia Txog:
Polyethylene - Qhov Hnyav Molecular Siab Tshaj Plaws
PE1000 muaj kev tiv taus kev sib txhuam zoo, cov yam ntxwv zoo heev thiab muaj zog heev. Nws muaj kev tiv taus tshuaj lom neeg zoo, muaj zog cuam tshuam zoo thiab nqus dej tsawg. PE1000 kuj tseem ua raws li cov khoom noj rau txhua yam kev siv ua khoom noj tseem ceeb.
| Txoj Kev Ua Haujlwm | Ntev (hli) | Dav (hli) | Thickness (hli) |
| Qhov Loj ntawm Daim Ntawv Pwm | 1000 | 1000 | 10-150 |
|
| 1240 | 4040 | 10-150 |
|
| 2000 xyoo | 1000 | 10-150 |
|
| 2020 | 3030 | 10-150 |
| Qhov Loj ntawm Daim Ntawv Extrusion | Dav: tuab>20mm, siab tshaj plaws tuaj yeem yog 2000mm；thickness≤20mm, max yuav yog 2800mmLength: unlimitedThickness: 0.5 hli mus rau 60 hli | ||
| Xim ntawv | Ntuj; dub; dawb; xiav; ntsuab thiab lwm yam | ||
Khoom Feature:
1. Kev tiv thaiv abrasive uas ib txwm muaj nyob rau hauv thermoelectricity polymer.
2. Zoo tshaj plaws poob siab tsis kam txawm tias nyob rau hauv qis kub.
3. Tsawg qhov sib txhuam, thiab cov khoom siv zawv zawg zoo.
4. Lubricity (tsis muaj caking, nyob rau hauv adhesion).
5. Zoo tshaj plaws tshuaj corrosion tsis kam thiab kev ntxhov siab craze tsis kam.
6. Muaj peev xwm ua haujlwm tau zoo heev.
7. Kev nqus dej tsawg tshaj plaws (<0.01%).
8. Paragon hluav taws xob rwb thaiv tsev thiab tus cwj pwm antistatic.
9. Zoo siab zog radioactive tsis kam.
10. Qhov ceev yog qis dua li lwm cov thermoplastics (< 1g/m3).
11. Siv qhov kub thiab txias ntev: -269 ° C - 85 ° C.
Kev Ntsuas Khoom:
Kev ua haujlwm siab heev
| Cov ntaub ntawv | UHMWPE | PTFE | Nylon 6 | Hlau A | Polyvinyl fluoride | Hlau ntshav |
| Tus Nqi Hnav | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Cov khoom siv lubricating zoo, kev sib txhuam tsawg
| Cov ntaub ntawv | UHMWPE - thee | Pob zeb pov tseg - thee | Paj ntaub phaj-thee | Tsis yog paj ntaub phaj-thee | Cov thee pob zeb |
| Tus Nqi Hnav | 0.15-0.25 | 0.30-0.45 | 0.45-0.58 | 0.30-0.40 | 0.60-0.70 |
Lub zog cuam tshuam siab, lub zog zoo
| Cov ntaub ntawv | UHMWPE | Pob zeb pov tseg | PAE6 | POM | F4 | A3 | 45# |
| Kev cuam tshuam lub zog | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700
|
Kev Ua Haujlwm Khoom:
| Khoom Siv Kuaj | Txoj Kev Ntsuas | Qhov tshwm sim |
| Coefficient ntawm kev sib txhuam zoo li qub (ps) | ASTM D1894-14 | 0.148 |
| Kev Sib Txhuam Kinetic (px) | ASTM D1894-14 | 0.105 |
| Flexural Modulus | ASTM D790-17 | 747MPa |
| Izod Notched Impact Strength | ASTM D256-10C1 Txoj Kev A | 840J/m P (ib nrab so) |
| Ntug dej Hardness | ASTM D2240-15E1 | D/64/1 |
| Modulus Tensile | ASTM D638-14 | 551 MPa |
| Lub zog tensile | ASTM D638-14 | 29.4MPa |
| Kev ntev thaum tawg | ASTM D638-14 | 3.4 |
Khoom Ntim:
Daim Ntawv Thov Khoom:
